High-volume value
Designed for flat roads and light loads, it is the most cost-effective motor in the range and keeps the drivetrain cost down for volume OEM orders.
CCC IP54 Wide Voltage Maintenance-Free
800W Permanent Magnet Brushless DC Motor
MODEL · BLDC MOTOR / 800W · 40H · 48/60/72V
800WRated Power
40HMagnet Height
4.13 / 4.4 kgWeight (Single / 4-Wire)
1.2 mCable Length
This is our highest-volume motor, built for vehicles that mostly run on flat roads—early-morning produce delivery, property maintenance transport, and short-haul runs in towns and villages. For routes of a few dozen kilometres and loads under 500 kg, 800W is the most cost-effective choice. Fitted with 40H magnet steel, it starts smoothly, holds steady at mid-speed, and works on 48V, 60V, or 72V systems, so OEMs can match it to whichever battery their local market uses.
- Flat-road, high-volume model
- 40H magnet, smooth start
- 88%+ efficiency
- 48/60/72V compatible
Why Choose This Product
Low running cost
With rated efficiency above 88%, it saves on electricity over many short trips, so a smaller battery is enough.
Fits compact vehicles
87mm housing and 225mm overall height make it compact enough for simple frames with limited chassis space.
Low maintenance
The brushless design has no carbon brushes, so there is no periodic brush replacement—after-sales usually means replacing the whole unit.
Specifications
| Item | Value |
|---|---|
| Rated Power | 800W |
| Magnet Height | 40H |
| Weight (Single / 4-Wire) | 4.13 / 4.4 kg |
| Cable Length | 1.2 m |
| Lead Type | Single / 4-wire optional |
| Housing Height | 87 mm |
| Motor Height | 225 mm |
| Shaft Length | 196 mm |
| Commutation | Brushless |
| Voltage | 48V / 60V / 72V |
| Magnet Material | NdFeB |
| Housing Type | Round / Square housing optional |
| Protection | IP54 |
| Rated Efficiency | ≥88% |
| Noise Level | ≤55 dB |
| Certification | CCC; meets EU export standards |
Product Details
Tuned for frequent stop-start
Market delivery and estate transport mean constant stop-start, with the motor repeatedly pulling away from rest. This motor delivers strong low-speed torque, starting with pull rather than a jerk, so the vehicle is easy to control.
- Strong low-speed torque
- Smooth start
- Frequent stop-start ready
- Easy to control
Cables and wiring
Standard 1.2m cable, available in single or four-wire. The single-wire is simple and low-cost; the four-wire separates phase and Hall lines, making setup clearer. Choose based on your controller.
- 1.2m standard cable
- Single / 4-wire
- Standardized connectors
- Matched to your controller
Applications & Cases
Urban/Rural Delivery
Early-morning produce delivery
Town fleets run 800W on 60V batteries for morning produce runs within 30 km.
Estate Transport
Property / campus transport
Carrying materials and waste around campuses and estates at low speed, with modest range needs.
Export CKD
Small-vendor CKD export
Shipped with simple CKD vehicles for street vendors on short-haul stall transport.
FAQ
- Q: Can 800W handle my load?
- A: Up to 500 kg on flat roads is fine. For a full load or frequent climbs, move up to 1000W or higher.
- Q: Can it run on 60V or 72V?
- A: Yes—48V, 60V and 72V are all supported. State your battery voltage when ordering.
- Q: Single or four-wire?
- A: It depends on your controller wiring. Choose single-wire for cost with standard controllers; four-wire for separate Hall lines and easier setup.
- Q: Which controller matches it?
- A: A 12-18 tube single-row controller is enough. We can supply the matched set.
Ecogo Global Vehicle | www.ecogoev.com | info@ecogoev.com | WhatsApp: +86 198 5169 9562